Product Data Sheet Show all documents

Sikafloor®-359 AU

Polyurethane UV Stable Pigmented and Clear Resin Coating

Sikafloor®-359 AU is a solvent based, hard wearing durable 2-part  finish coat for Sikafloor Systems. Available as a pigmented finish, clear satin finish or clear gloss finish.

  • Excellent in mechanical and chemical resistance
  • UV stable
  • Use as a finish coats for Sikafloor Park Deck Systems
  • UV stable over Sikafloor epoxy ES, EB & ET systems
  • Internal / External application
  • Excellent Petrol, Diesel & Skydrol resistance

 
Product Data Sheet Show all documents

Usage

  • Carparks all levels
  • Aeronautical
  • Defence
  • Automotives
  • Garages
 

Advantages

  • Excellent in mechanical and chemical resistance
  • UV stable
  • Use as a finish coats for Sikafloor Park Deck Systems
  • UV stable over Sikafloor epoxy ES, EB & ET systems
  • Internal / External application
  • Excellent Petrol, Diesel & Skydrol resistance

 

Packaging

Part A

15 litres

Part B

  5 litres

A+B Kit 

20 litres

Colour

Resin - Part A

Either Clear Gloss/Satin or Pre-Tinted in required colour

Hardener - Part B

Transparent, Liquid

Sikafloor®-359 AU is available in N45 Koala Grey and other RAL colours on request.
▪ Non standard colours can be supplied on request. (Check with Sika if additional cost applies)
▪ Refer to the Sikafloor epoxy colour chart for details

Product Details

Product Information

Composition

Polyurethane

Shelf life

12 months from date of production

Storage conditions

The product must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5 °C
and +30 °C.

Density

Clear

Pigmented

Part A~ 0.95 kg/l~ 1.22 kg/l

Part B

~ 0.98 kg/l

~ 0.98 kg/l

Mix resin

~ 0.96 kg/l

~ 1.14 kg/l

Application

Application Information

Mixing ratio

Clear & Pigmented - Part A:Part B = 3:1 (by volume)

Ambient air temperature

+10 °C min. / +30 °C max.

Pot Life

Approx. 50 mins at ±23oC

Waiting time to overcoating

Approx. 4 hours at ±23oC

Applied product ready for use

Foot traffic: Approx. 24 hrs. at ±23oC

Heavy traffic: Approx. 48 hrs. at ±23oC
Consumption

Consumption

Approx. 7-10 m2/litre/coat
Application steps

MIXING

Prior to mixing, stir part A mechanically. When all of part B has been added to part A, mix continuously for 2 minutes until a uniform mix has been achieved.

APPLICATION

Prior to application, confirm substrate moisture content, relative humidity and dew point. As a seal coat, the product can be applied by squeegee and then back-rolled (crosswise) with a short-piled roller.

 

CLEANING OF EQUIPMENT

Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.

Documents