Sika® Injection-111

MDI based urethane

12 months

From date of production if stored properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between
+5°C and +30°C.

1.15-1.20 (g/cm3)

> 150 °C

160-170 mPa.s ( 21 °C)

Data based on 10% addition of Sika® Injection-111C (Catalyst)  

Maximum 2500%

*This varies depending on amount of Sika® Injection 111C Catalyst used and temperatures

Sika® Injection-111 requires the catalyst Sika® Injection-111C to create a reactive foam for injection.

Typical mix ratios vary from 2-10% of the Sika® Injection-111C depending on the reaction time required, please refer to the reaction table on this PDS for the information.

Reaction time at 5°C

Reaction time at 15°C

Reaction time at 25°C

Sika® Injection-111 is typically injected by use of a single component pump that is designed for high pressure use.

Sika® Injection-111 should be mixed with Sika® Injection-111C using a paddle drill mixer to create a uniform homogeneous liquid for a minimum of 20-30 seconds.

Please consult equipment/pump manufacturer for relative cleaning agent suitable for your individual equipment being used.