Product Data Sheet Show all documents
SikaBond®-145 SuperGrip

SikaBond®-145 SuperGrip

Premium polyurethane construction adhesive with fast build up of Strength

SikaBond®-145 SuperGrip is a premium grade one-component polyurethane construction adhesive with good initial grab and high strength after 30 minutes^. SikaBond®-145 SuperGrip is a versatile, ready to use, fast curing, general purpose construction adhesive suitable for interior and exterior use.

  • One-component.
  • Interior & exterior.
  • Non-shrink.
  • Non-sag.
  • High initial grab.
  • Adheres rapidly.
  • Stong bond in 30 minutes^.
  • Fast cure.
  • Solvent-free.
  • Resistant to heat.
  • Resistant to weathering.
  • Water resistant -D4 according to DIN En 204
  • Applies white, can dry translucent if applied in thin layers.
^See Curing time below.
Product Data Sheet Show all documents

Usage

SikaBond®-145 SuperGrip is suitable for use in construction and repair applications where a permanent strong bond is required between porous-nonporous surfaces. SikaBond®-145 SuperGrip is suitable for bonding most common construction materials such as:
  • Wood 
  • MDF
  • Concrete
  • Brick
  • Metal
  • Polystrene
  • Polyurethane foam
  • Some PVC
  • Marble
  • Granite
  • Ceramic
  • LOSP Timber
 

Advantages

  • One-component.
  • Interior & exterior.
  • Non-shrink.
  • Non-sag.
  • High initial grab.
  • Adheres rapidly.
  • Stong bond in 30 minutes^.
  • Fast cure.
  • Solvent-free.
  • Resistant to heat.
  • Resistant to weathering.
  • Water resistant -D4 according to DIN En 204
  • Applies white, can dry translucent if applied in thin layers.
^See Curing time below.

Packaging

310ml Cartridge

Colour

Applies white (may dry translucent if applied if thin layers)

Product Details

Product Information

Composition

Polyurethane

Shelf life

12 months if storage conditions are met.

Storage conditions

SikaBond®-145 SuperGrip stored in original, unopened packaging in cool, dry conditions at temperatures between +5°C and +25°C.

Density

~1.15 g/cm3

(DIN 53479)
Technical Information

Temperature resistance

-40 °C to +90 °C

Application

Application Information

Curing time

Approximately 30 minutes to provide initial bond strength, depending on temperature, moisture content of surfaces and adhesive thickness. Some non-porous substrates (such as metal) may require 1 hour to reach initial bond strength.

Strength will continue increase over the next 24-48 hours to full cure.

Tack free time

~ 5 - 10 minutes
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and free from all dust, laitance, scale, rust, loose particles, grease and foreign matter.

 

CLEANING OF EQUIPMENT

Clean up tools and equipment with acetone or white spirit. Cured adhesive can only be removed mechanically.

Documents