Product Data Sheet Show all documents
SikaSeal® Appliance Sealant

SikaSeal® Appliance Sealant

Premium one-component room temperature vulcanising silicone sealant

SikaSeal® Appliance Silicone Sealant is a premium one-component room temperature vulcanising (RTV) silicone rubber designed for flexible gasketing and sealing applications. SikaSeal® Appliance Silicone Sealant forms a tough but flexible seal of all shapes and sizes and fills any surface voids. The cured product can withstand vibration, weathering, temperature extremes, water oil and grease without hardening, shrinking or cracking.

  • High temperature resitance (-50°c to 250°c)
  • Excellent adhesion
  • Heat proof
  • Gap filling properties
  • Vibration resistant
  • Highly versatile
  • Excellent resistance to aging, shrinkage, cracking and disclouration.
Product Data Sheet Show all documents

Usage

  • Fridge and freezer sealing
  • Pizza oven sealing
  • Oven sealing
  • Aluminium
  • Glass
 

Advantages

  • High temperature resitance (-50°c to 250°c)
  • Excellent adhesion
  • Heat proof
  • Gap filling properties
  • Vibration resistant
  • Highly versatile
  • Excellent resistance to aging, shrinkage, cracking and disclouration.

Packaging

300ml Cartridge, 12 cartridges per box

Colour

Black

Product Details

Product Information

Composition

1-C Silicone (acetoxy)

Shelf life

18 months from date of production if in undamaged and unopened original sealed containers and stored according to the storage conditions.

Storage conditions

Must be stored in dry conditions and protected from direct sunlight at temperatures between +10ºC and +25ºC.

Density

~0.98 Kg/l (uncured)
Technical Information

Shore A hardness

~22

Secant tensile modulus

~1.05 MPa

Tensile adhesion strength

~1.0 N/mm2

Application

Application Information

Ambient air temperature

+5°c to +45°c

Curing time

~24 hours

Skinning time

~10 minutes

Tack free time

~20 minutes
Application steps

SUBSTRATE PREPARATION

Ensure all surfaces are clean, dry and free from dust, grease and loose material. Remove all old gasket material from surfaces before cleaning with a residue-free solvent and allowing to completely dry.

CLEANING OF EQUIPMENT

Uncured, excess SikaSeal® Appliance may be removed with Sika® Remover-208 or another suitable solvent. Once cured, the excess sealant can be trimmed away from the edges with a knife.

Documents