Product Data Sheet Show all documents

SikaBond® SprayFix

Multipurpose, high performance, aerosol spray adhesive

SikaBond® SprayFix is a multipurpose, high performance, aerosol spray adhesive which can be used for both temporary and permanent bonding applications.

  • Easy to use
  • Low odour
  • Dries clear
  • Fast drying time (approximately 2-4 minutes)
  • High initial strength
  • Contains no chlorinated solvents - suitable for indoor use
  • Repositionable for 1-2 minutes
  • Versatile – bonds well to many substrates
Product Data Sheet Show all documents

Usage

Typical applications include:
  • Upholstery
  • Floor and other repairs
  • Furniture lamination
  • Art and craft work (e.g. mounting prints)
SikaBond® -SprayFix can be used on many substrates, including:
  • Felts and fabrics
  • Metals
  • Foams
  • Cork
  • Most plastics
  • Rubber gaskets
  • Fibreglass
  • Wood e.g. plywood, particle board
 

Advantages

  • Easy to use
  • Low odour
  • Dries clear
  • Fast drying time (approximately 2-4 minutes)
  • High initial strength
  • Contains no chlorinated solvents - suitable for indoor use
  • Repositionable for 1-2 minutes
  • Versatile – bonds well to many substrates

Packaging

150g, 350g

Colour

White (clear when dry)

Product Details

Product Information

Composition

Synthetic polymer

Shelf life

2 years if storage conditions are met

Storage conditions

Must be stored in original, undamaged packaging, in dry conditions and out of direct sunlight, at temperatures between +10°C and +25°C.

Application

Application Information

Ambient air temperature

+10°C - +40°C

 
Application steps

SUBSTRATE PREPARATION

The surface must be clean, dry and free of dust, grease and oils.

CLEANING OF EQUIPMENT

After use, the spray tip should be flushed by turning the can upside down and pressing the tip until clear propellant comes out. Uncured  overspray may be removed with Sika® Colma Cleaner or another suitable solvent. Once cured, the material can be removed mechanically.

Documents