Product Data Sheet Show all documents
SikaBond®-105 ContactFix

SikaBond®-105 ContactFix

FAST CONTACT ADHESIVE

SikaBond®-105 ContactFix is a premium sprayable contact adhesive that has been formulated to meet varied needs for laminate fabrication. This adhesive gives fast drying time, and a strong heat resistant and water resistant bond.

  • One-component adhesive
  • Very short flash-off time
  • High initial strength
  • Easy to apply
  • Resistant against aging
  • High heat resistance
  • Broad adhesion range
  • Fast dry time (Approximately 3-5 minutes)
Product Data Sheet Show all documents

Usage

SikaBond®-105 ContactFix has a very broad adhesion range and gives a strong and lasting bond. Suitable substrates are timber, rubber sheets, plastic laminates, fabric, cloth backed and polyester backed vinyl, MDF, particleboard, concrete, glass and metal sheets. In the production of transport vehicles SikaBond®-105 ContactFix is suitable for the room temperature contact bonding of different covering materials e.g. PUR foams, textiles and for adjoining steps, wheel arches, seat brackets and side walls, especially for covering materials with high spring-back forces, like cover trims and edging profiles. SikaBond®-105 ContactFix is also suitable for auto upholstery and furniture upholstery. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Advantages

  • One-component adhesive
  • Very short flash-off time
  • High initial strength
  • Easy to apply
  • Resistant against aging
  • High heat resistance
  • Broad adhesion range
  • Fast dry time (Approximately 3-5 minutes)

Packaging

500ml, 1L, 4L Can

20L Pail

Colour

Yellow

Product Details

Product Information

Composition

One-component polychloroprene

Shelf life

12 months if stored according to the storage conditions.

Storage conditions

Must be stored in original, undamaged packaging, in dry conditions and out of direct sunlight, at temperatures between +10°C and +25°C.

Density

0.81 kg/l approximately

Solid content by mass

17% approximately

Consistency

350 mPa.s approximately

Application

Consumption

Consumption

6 - 8m2 / Litre
Application steps

SUBSTRATE PREPARATION

The adhesion surfaces must be clean, dry and free of oils, fats, loose and friable materials.

CLEANING OF EQUIPMENT

Uncured SikaBond®-105 ContactFix may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin should be washed immediately using Sika® Handclean towel or a  suitable industrial hand cleaner and water. Do not use solvents.

Documents