Sikafloor® Level PRO Finish
Sikafloor® Level PRO Finish is a fast-drying self-priming skim coat that provides a smooth flat surface when dry.
- Very low VOC
- Green star certified
- High moisture tolerance
- Suitable for castor wheels loadings
- Non-combustible
- Fast drying
- Self-priming on smooth trowel finish concrete
- Applied from feather edge up to 4mm

Usage
- Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges
- Installed as a skim coat over internal concrete
- Can be used on walls and floors to smooth roughened/damaged concrete
Advantages
- Very low VOC
- Green star certified
- High moisture tolerance
- Suitable for castor wheels loadings
- Non-combustible
- Fast drying
- Self-priming on smooth trowel finish concrete
- Applied from feather edge up to 4mm
Packaging
9kg (3x3kg) Pail - 64 per pallet
Colour
Grey powder
Product Details
APPROVALS / CERTIFICATES
Green Star (VOC-SCQMD Rule 1168)
Composition
Polymer modified cement compound
Shelf life
Unopened packaging can be stored for up to 24 months in a cool, dry and
weatherproof environment.
Storage conditions
Pails must be stored off the floor. Avoid sitting product in direct sunlight prior to application.
System structure
Porous Concrete - Masonite - CFC | Very Porous Concrete | Moisture Barrier | Non-porous Surface | |
Substrate | Substrate | Concrete (Up to 98%RH) | Tiles or epoxy coatings | |
Sikafloor® Level PRO Finish | Sikafloor 01 Primer | Sikafloor®-158 W Fast Barrier | Sikafloor® 14 Prep 'N' Prime | |
SikaBond®-150 Premium Floor | Sikafloor® Level PRO Finish | Sikafloor® 14 Prep 'N' Prime | Sikafloor® Level PRO Finish | |
Chosen flooring | SikaBond®-150 Premium Floor | Sikafloor® Level PRO Finish | SikaBond®-150 Premium Floor | |
| SikaBond®-150 Premium Floor | Chosen flooring | ||
Chosen flooring |
Water absorption
Porous
Reaction to fire
No hazardous combustion products are known
Application
Mixing ratio
1.4 - 1.5 Litres of clean, cool water per 3kg of powder.
Layer thickness
0 - 4mm
Ambient air temperature
- Minimum 10°C
- Maximum 35°C
Pot Life
10 - 15 Minutes @ 23°C
Do not mix more product than can be applied within 15 minutes.
Waiting time to overcoating
Flooring can be installed only when surface is dry and can be worked on without damage (usually 20 – 30 minutes @ 23°C).
Consumption
25-30m2 can be reached with 3kg of Sikafloor® Level PRO Finish when
applying as a skim coat over a smooth porous concrete surface.
Multiple coats may be required when installing over textured substrates & Sikafloor®-14 Prep 'N' Prime
Consumption will vary depending on surface conditions.
EQUIPMENT
- High speed drill & mixing paddle, bucket + trowel
APPLICATION
Apply mixed product to the prepared surface with a flat steal trowel. While using force against the surface a thin layer is applied to seal the concrete and fill minor imperfections.
CLEANING OF EQUIPMENT
Clean tools and equipment with warm water while the product is still wet.