Product Data Sheet Show all documents
SikaControl® PLUS

SikaControl® PLUS

Shrinkage-Reducing Admixture

SikaControl® PLUS is a shrinkage-reducing admixture used to produce high performance concrete with greatly reduced drying shrinkage.

  • Reduced drying shrinkage.
  • Reduction in the potential for drying shrinkage cracking.
  • Reduces the potential for slab curling.
  • Substantially reduces the occurrence of drying shrinkage cracks and therefore reduces permeability, resulting in improved concrete durability.
Product Data Sheet Show all documents

Usage

  • In premixed and precast concrete elements to reduce the drying shrinkage of the concrete.
  • In thin bonded topping slabs, to minimise the difference in shrinkage between the new topping and the existing substrate.
  • In concrete elements which are restrained against shrinkage.
  • For durable concrete in marine environments.
  • For watertight concrete in reservoirs, sewage treatment plants, dams.
 

Advantages

  • Reduced drying shrinkage.
  • Reduction in the potential for drying shrinkage cracking.
  • Reduces the potential for slab curling.
  • Substantially reduces the occurrence of drying shrinkage cracks and therefore reduces permeability, resulting in improved concrete durability.

Packaging

Bulk deliveries

1000 litre IBC

205 litre drum

10 litre container

Colour

Colourless liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

SikaControl® PLUS meets and exceeds all requirements of Australian Standard 1478.1-2000 as Special Purpose Admixture Type (SN).
Product Information

Composition

Liquid hydroxyl combinations

Shelf life

Stored at temperatures between 5°C and 35°C in unopened original containers protected from direct sunlight , shelf life is at least one (1) year.

Storage conditions

Store at temperature between 5°C and 35°C, protected from direct sunlight.

Specific gravity

0.98 g/cm3

Application

Application Information

Dispensing

The required dosage of SikaControl® PLUS should be added to the concrete at the batching plant, with the gauging water or poured into the concrete simultaneously with the gauging water.  It may also be added into the transit mixer at the point of discharge, but an additional mixing time of 60 seconds/m3 is required and the concrete should be visually checked for uniform consistency.

Compatibility

SikaControl® PLUS is compatible with other Sika Concrete admixtures, however, they must be added separately. 

Do not pre-mix SikaControl® PLUS with other admixtures, and always conduct trials to test compatibility.
Consumption

Recommended dosage

Typical dosage rate is 1.0 – 3.0% by weight of total cementitious material. Optimum dosage depends on specified requirements, mix ingredients and required plastic and hardened properties.

Laboratory and/or field trials are essential in determining the optimum dosage.

Documents