Sikafloor® Level PRO
Sikafloor® Level Pro is a premium levelling
compound applied prior to the installation of flooring.
- Very low VOC (3 grams per litre)
- Green Star Certified
- Very low shrinkage
- Simply mix & apply - No slaking or re-mixing required
- Able to be applied across large floor areas in a single application
- Non-combustible
- Good pot life and working time
- Pump or manual application
- Highly fluid
Always use with Sika’s range of Primers
Usage
Applied in combination with suitable materials fromSikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco®
ranges.
• Recommended underlayment for all commercial &
residential floorcoverings
• Levelling of uneven concrete
• Suitable for new or old internal concrete substrates
Advantages
- Very low VOC (3 grams per litre)
- Green Star Certified
- Very low shrinkage
- Simply mix & apply - No slaking or re-mixing required
- Able to be applied across large floor areas in a single application
- Non-combustible
- Good pot life and working time
- Pump or manual application
- Highly fluid
Packaging
20kg Bag - 48 bags per pallet
Colour
Grey powder
Product Details
APPROVALS / CERTIFICATES
Green Star (VOC-SCQMD Rule 1168)
Composition
Polymer modified cement compound
Shelf life
Unopened bags can be stored for up to 9 months in a cool, dry and
weather proof environment.
Storage conditions
Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.
System structure
Porous Concrete | Moisture Barrier | Non-porous Surfaces | |
Sikafloor® Level Pro Primer or Sikafloor® 08 Primer | Sikafloor®-158 W Fast | Sikafloor®-14 Eco Prep 'N' Prime | |
Sikafloor® Level Pro | Sikafloor®-14 Eco Prep 'N' Prime | Sikafloor® Level Pro | |
Subsequent suitable materials | Sikafloor® Level Pro | Subsequent suitable materials | |
|
Compressive strength
1 day cure – 16MPa
28 day cure – 30MPa
Tensile strength in flexure
28 day cure – 6MPa
Water absorption
Porous
Reaction to fire
No hazardous combustion products are known
Application
Mixing ratio
5 - 5.2 Litres of clean, cool water
Layer thickness
1 - 30mm(neat) and 10-50mm (bulked out with 1-2mm aggregate) .
Ambient air temperature
10°C - 35°C
Pot Life
18 minutes @ 23°C
Initial set time
65 Minutes @ 23°C
Final set time
80 Min @ 23°C
Waiting time to overcoating
Allow 18 hours at 23°C prior to the application of impervious floor
coverings. Drying is dependent on thickness of application, temperature,
air flow & relative humidity. Increased air flow will help with drying speeds
in cooler temperatures.
Yield
12 Litres - 4m2 @ 3mm thickness
EQUIPMENT
▪ High speed heavy duty electric drill, mixing paddle &
suitable size bucket/vessel - 20L +
▪ Purpose built mechanical pump
MIXING
Mix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. When applying above 20mm Sika® recommends 5L be added. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix for 2 minutes to a lumpfree consistency. Not mixing for the recommended time or additional water may result in product irregularities and possible product failure.Sikafloor® Level Pro can be bulked out with 10kg of 1-2mm aggregate for thicknesses 10-50mm thick.
APPLICATION
Pour or Pump Sikafloor® Level Pro, then spread with a
long handled gauged spreader to heights as required.
Sikafloor® Level Pro will seek its own level during the
first 12 minutes. For touch-ups, use a flat steel trowel.
Note:
Areas of application must have fresh airflow to assist
with product hydration and drying.
Closed off rooms with no fresh air will retard the
drying process and possibly lead to product failure.