Sikafloor® MultiDur ET-14
Sikafloor® MultiDur ET-14 is pigmented durable, high build, textured epoxy floor coating system. It also provides unique non blooming/whitening properties when exposed to moisture early in curing and/or in lower cure environments. Sikafloor® MultiDur ET-14 can also be used vertically on coves and walls.
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Non blooming/whitening
- Texture varied to suit application
- Easy cleanability
System Structure
Usage
- Automotive workshops
- Education - Trade work areas.
- Stadiums
- Correctional facilities
- Amenities and change-rooms
- Manufacturing, Packing and processing, light to medium duty
- Car parks - intermediate and lower decks
Advantages
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Non blooming/whitening
- Texture varied to suit application
- Easy cleanability
Colour
Available in colours from the RAL range on request.
Standard colours: Light Grey 7035, Pebble Grey 7032, Koala Grey N45, Window Grey 7040, Dusty Grey 7037, Oxide Red 3009, Sky Blue 5015, Dahlia Yellow 1033.
Appearance
Textured, low sheen to semi gloss finish
System Details
APPROVALS / CERTIFICATES
- Textures - Conforms to AS 4586-2013 P Ratings
- VOC - Australian Standards ASTM D3960 Gren Star Building Council V2 IEQ-13 V1 IEQ-11
- Cleanability “Excellent” (VDMA “Riboflavin test for low germ or sterile process technologies” tested).
- Slip resistance class R9 in accordance with DIN 51130 and BGR 181.
- Conforms to the requirements of EN 13813 and EN 1504-2
- Fire Classification Australia - Critical Radiant Flux - Pass AS/ISO 9239.1 AP VS0209 appendix B
- Fire classification in accordance with EN 13501-1, Report-No. KB-Hoch-170419, Hoch Fladungen, Germany, March 2017
System structure
Sikafloor® MultiDur ET-14
| 1. Primer (Optional) | Sikafloor®-161/-160 |
| 2. Wearing Coats | 1 x Sikafloor®-264 1 x Sikafloor -264T AU |
Note: Addition of 60 or 80 mesh aluminium oxide incorporated into the final coat at 5-6%vol will produce additional texture
The addition of primer is subject to total film thickeness and substrate conditions.
Composition
Epoxy
Nominal thickness
~ 0.5mm to 0.7mm
Shore D Hardness
| ~76 (7 days / +23 °C) | (DIN 53 505) |
Compressive strength
| Resin : ~60 N/mm2 (28 days / +23 °C) | (EN 196–1) |
Tensile adhesion strength
> 1.5 N/mm² (failure in concrete) | (ISO 4624) |
Reaction to fire
| Critical radiant flux - Pass | AS/ISO 9239.1 AP VS0209 Appendix B |
Chemical resistance
Resistant to many chemicals. Please ask for a detailed chemical resistance table.
Skid / slip resistance
| P1 to P4 (depending on texture approach) | AS 4586 -2013 |
Application
Material temperature
Please refer to the individual Product Data Sheet
Ambient air temperature
+10 °C min. / +30 °C max.
Relative air humidity
80 % r.h. max.
Substrate temperature
+10 °C min. / +30 °C max.
Substrate moisture content
When performing application work with Sikafloor® MultiDur ET-14, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Use Sikafloor 161 Primer for moisture to 6%pbw.
For >6%pbw use EpoCem 81.
Waiting time to overcoating
Before applying Sikafloor®–264 anfd 264T AU on Sikafloor® 161/–160 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Note: For faster intercoat times use Sikafloor Booster - Refer to Sika Technical Dept. for direction.
Applied product ready for use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur ET-14 system ( ~ 0.5-0.7 mm)
| Coating System | Product | Consumption |
| Primer (optional) | 1 × Sikafloor®-161/-160 | ~ 0.25-0.35 kg/m² (4-6m²/litre) |
| 1st Coat | 1× Sikafloor®-264/-264T AU | ~ 0.25-0.35 kg/m² (4-6m²/litre) |
| Top Coat | 1 x Sikafloor 264/-264T AU | ~ 0.20-0.30 kg/m² (5-7m²/litre) |
SUBSTRATE QUALITY
Substrate strength to produce a bond pull value of >1.5Mpa.
SUBSTRATE PREPARATION
Subsrate should be prepared to CSP2 - approx 0.5mm in profile.
Any imperfections greater than this should be filled using Sikafloor 160 or 161 with fillers.
APPLICATION
Application of finish coat Sikafloor 264T AU should be by roller or Squeegee and back roll process. Ensure an even application by using correct roller equipment and rolling techniques. Observe pot life of mixes applied at the site as well joining wet edges with the appropriate timing.
Failure to do any of the above will produce uneven texture and or colour.
Refer to Sika Technical Dept. for direction
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime