Sikafloor® Level PRO

Green Star (VOC-SCQMD Rule 1168)

Polymer modified cement compound

Unopened bags can be stored for up to 9 months in a cool, dry and

weather proof environment.

Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.

1   day cure – 16MPa
28 day cure – 30MPa

28 day cure – 6MPa

Porous

No hazardous combustion products are known

5 - 5.2 Litres of clean, cool water

1 - 30mm(neat) and 10-50mm (bulked out with 1-2mm aggregate) .

10°C - 35°C

18 minutes @ 23°C

65 Minutes @ 23°C

80 Min @ 23°C

Allow 18 hours at 23°C prior to the application of impervious floor

coverings. Drying is dependent on thickness of application, temperature,

air flow & relative humidity. Increased air flow will help with drying speeds

in cooler temperatures.

12 Litres - 4m² @ 3mm thickness

▪ High speed heavy duty electric drill, mixing paddle &
suitable size bucket/vessel - 20L +
▪ Purpose built mechanical pump

Mix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. When applying above 20mm Sika® recommends 5L be added. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix for 2 minutes to a lumpfree consistency. Not mixing for the recommended time or additional water may result in product irregularities and possible product failure.Sikafloor® Level Pro can be bulked out with 10kg of 1-2mm aggregate for thicknesses 10-50mm thick.

Pour or Pump Sikafloor® Level Pro, then spread with a
long handled gauged spreader to heights as required.
Sikafloor® Level Pro will seek its own level during the
first 12 minutes. For touch-ups, use a flat steel trowel.
Note:
Areas of application must have fresh airflow to assist
with product hydration and drying.
Closed off rooms with no fresh air will retard the
drying process and possibly lead to product failure.