Davco® Sanitized Colorgrout
A premium cementitious grout designed for use with most types of ceramic tiles and natural stone applications. Davco® Sanitized Colorgrout is design for use in joints from 1-6 mm width.
- Mould and bacteria resistant - Sanitized®
- Ideal for dry and wet areas including swimming pools and spas
- For joints 1-6mm wide
- Available in various colours to suit your application
Usage
Suitable for interior and exterior applications. Commercial and domestic walls and floors including swimming pools and wet areas. It is not suitable for use in harsh and demanding environments or where there are hygienic requirements i.e. commercial kitchens, public toilets, food processing plants etc. For these types of installations, use a suitable Sika epoxy tile grout.Advantages
- Mould and bacteria resistant - Sanitized®
- Ideal for dry and wet areas including swimming pools and spas
- For joints 1-6mm wide
- Available in various colours to suit your application
Packaging
Available in a 1.5kg, 5kg or 15kg bag
Product Details
Product Declaration
CG2 WA Classification - AS ISO 13007.3
Shelf life
12 months from date of manufacture if unopened.
Storage conditions
Store off ground in dry cool conditions out of direct sunlight.
Bulk Density
1.4kg/L
Volatile organic compound (VOC) content
Low VOC - 3g/L (SCAQMD method 304-91)
Application
Mixing Ratio
Application | Mix requirements per 15kg bag | |
General applications | 3-3.4 Ltrs of clean cool potable water | |
Areas subject to considerable movement or improved adhesion requirements | 1.9L of Davco 4 in 1 Grout Additive + 1.9L of clean, potable water |
Pot Life
40 Minutes, Measured at 23°C and 50% relative humidity
Applied Product Ready for Use
Application | Wait time |
Dry areas & light foot traffic | 24 hours |
Wet areas | 5 days |
Submerged - prior to filling with water | 21 days |
All measurements are taken at 23ºC and 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only
Consumption
The coverage of the grout will vary depending upon the texture, size and thickness of the tile and the width of the grout joint. Use the table below as a general guide:
QTY OF GROUT REQUIRED KG/M2 JOINT WIDTH
Tile Size | 1.5mm joint | 3mm joint | 6mm joint |
50x50x6mm | 0.8kg | 1.6kg | |
100x100x6mm | 0.4kg | 0.8kg | 1.6kg |
150x150x6mm | 0.3kg | 0.6kg | 1.2kg |
200x100x6mm | 0.3kg | 0.6kg | 1.2kg |
300x300x10 | 0.3kg | 0.5kg | 1.0kg |
EQUIPMENT
- Grout float or grout applicator
- Slow speed mixing drill with stirrer attachment
- Mixing buckets
- Grouting sponge
- Microfibre cloth
MIXING
- Measure the right amount of clean, potable water into a clean bucket.
- Slowly add the powder into the water while mixing with a mixing paddle attached to a drill. Do not mix by hand.
- Continue to mix for several minutes until a creamy consistency is achieved, free of lumps of powder.
- Allow mixture to stand for 5 minutes, remix then use the grout.
- The grout may stiffen during the pot life, restir without adding additional water.
APPLICATION
- Prior to grouting it is advisable to lightly dampen the grout joints, particularly with porous tiles or in warmer conditions. If the tiles are particularly porous it is advisable to prime the joints with Davco 4 in 1 Grout Additive after dampening to seal the edge of the tile.
- Using a rubber float or squeegee work the grout into the joints in a diagonal motion making sure that the grout does not just sit on top of the joint i.e. the grout does not bridge the joint.
- Remove excess grout from the surface of the tiles with the rubber float or squeegee using a diagonal motion.
- Use a damp sponge to clean up the remainder of the grout. Regularly rinsing the sponge out to assist in cleaning.
- Finally remove any excess moisture from the grout joints, to avoid discolouration or colour variation problems.
- Allow the grout to cure for 24 hours before cleaning the grout haze with a soft dry cloth.
- Hard to remove haze can be cleaned with Davco Sanitized® Tile & Grout Cleaner.
- Allow product to set firmly before return to service
- Setting times of grout is affected by site conditions, climate and could be faster or slower than specified
CLEANING OF TOOLS
Clean tools and equipment with water before the grout dries.
Grout Calculator
Calculator Product Disclaimer:
It is recommend to add 10-15% more material to allow for wastage factor.
Rejuvenation Grout
Coverage calculation is based on a 1.5 joint depth.
Slate & Quarry Grout
Only available in 20kg bag.
SikaCeram-690 Elite Grout
Only available in 5kg bag.
Davco Easy Grout
Packaging size in litres.