SikaRoof® VersiScape Panel
SikaRoof® VersiScape Panel is a safety panel for use with SikaRoof® VersiJack® to provide a raised substructure that acts as a safety net in case of accidental paver breakage. The safety panels are manufactured from recycled polypropylene (PP) and the safety panels construct a levelled surface that accommodates 600 x 600 x 20 mm ceramic pavers.
- Recyclable components
- Resistant to biological attack by moulds and algae
- Chemically resistant to acids, alkalis, oil and soil chemicals
- Operates within a wide service temperature range
Usage
Safety panel for raised flooring for podiums, balconies and roof terraces. The safety panel is used to raise 600 x 600 x 20 mm conventional porcelain pavers.Advantages
- Recyclable components
- Resistant to biological attack by moulds and algae
- Chemically resistant to acids, alkalis, oil and soil chemicals
- Operates within a wide service temperature range
Packaging
- SikaRoof® VersiScape Panel: 4 pieces / bundle
- SikaRoof® VersiScape Panel 8H: 4 pieces / bundle
Colour
Black square panel
Product Details
Shelf life
No expiration date if the product is stored in accordance to the storage conditions as stated in this Product Data Sheet
Storage conditions
Bundles must be stored in their original packing, laid in a horizontal position, and under cool and dry conditions. The product must be protected from direct sunlight, rain, snow and ice, and any other elements
Dimensions
600 x 600 x 32 mm
Weight
2.65 kg / panel
Compressive strength
| Allowable Distributed Loads | 5 kN/m2 |
| Point Loads - Ø300 mm in centre - 150x150 mm w centre pedestal |
550 kg @ 9 mm deflection |
Service temperature
- 30 °C to 80 °C
Application
SUBSTRATE PREPARATION
Clean and sound surface shall have at least a wood float finish. All holes, joints, and cracks and honeycombs in concrete or masonry surfaces shall be filled with an approved grout and allowed to cure. High spots in concrete or masonry surfaces shall be cut off or ground down to prevent damage/puncture to the pedestal base.
APPLICATION
SikaRoof® VersiScape Panel shall be loosely laid without any mechanical fixing on top SikaRoof® VersiJack®. For fastened application, the panel may be screwed to the pedestal at allocated pilot screw features with approved screws. The first panel and paver shall be installed to the correct elevation followed by levelling with a levelling device, to serve as a reference. Subsequent panels and pavers shall be installed and checked to ensure consistent and correct elevation, till a sturdy and rigid raised flooring is obtained, free of rattling, squeaking or other noises.