Product Data Sheet Show all documents
Sikagard®-706 Thixo

Sikagard®-706 Thixo

Sikagard-706 Thixo is a one part reactive silane based impregnation cream. It is a solvent free product with ~ 80% content of active substance. Sikagard-706 Thixo complies with the highest requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses).

Sikagard®-706 Thixo is a one-component reactive silane based impregnation cream.
It is a solvent free product with ~ 80% content of active substance. Sikagard®-706 Thixo complies with the highest requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses).

  • Non-sag (thixotropic) consistency, allowing wastage-free application of sufficient quantities and assuring deep penetration
  • Reduction of water absorption
 
  • Reduction of absorption of aggressive or deleterious agents dissolved in water (i.e. de-icing salts or chloride from marine environment)
  • No noticeable change of water vapour permeability
  • Not film forming
  • Ready for use
  • Long term efficiency, deep penetration
  • Increases the resistance of concrete to freeze and thaw cycles and de-icing salts
  • Resistant to sea water
  • Low VOC content
Product Data Sheet Show all documents

Usage

Sikagard®-706 Thixo is used as water-repellent impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures subjected to heavy stress due to freeze and thaw cycles and de-icing salts or chloride attack in marine environment
  • Suitable for protection against ingress (Principle 1, method 1.1 of EN 1504-9)
  • Suitable for moisture control (Principle 2, method 2.1 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.1 of EN 1504-9)

Advantages

  • Non-sag (thixotropic) consistency, allowing wastage-free application of sufficient quantities and assuring deep penetration
  • Reduction of water absorption
 
  • Reduction of absorption of aggressive or deleterious agents dissolved in water (i.e. de-icing salts or chloride from marine environment)
  • No noticeable change of water vapour permeability
  • Not film forming
  • Ready for use
  • Long term efficiency, deep penetration
  • Increases the resistance of concrete to freeze and thaw cycles and de-icing salts
  • Resistant to sea water
  • Low VOC content

Packaging

18 kg and 180 kg containers

Colour

White paste / cream (transparent after application and drying)

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Conforms to the requirements of LPM-qualification test to SIA 162/5, Report A-20 450-1 of 19.04.1999. (Water absorption, penetration depth, alkali resistance, water vapour diffusion, resistance to freeze thaw cycles and de-icing salts).
  • Conforms to the requirement of the “Bro 2002” Swedish National Road Administration (SNRA) publication No. VV2002:47 –report reference F507580 Arev
  • Conforms to the requirements of the EN 1504-2 class II – Polymer Institute report P 5672-E dated 9th August 2007.
  • Hydrophobic impregnation according to EN 1504-2, DoP 02 03 03 01 002 0 000003 1105; certified by Factory Production Control Body: 0921; certificate 0921-BPR-2050 and provided with the CE-mark
Product Information

Composition

Silane

Active content

~ 80%

Shelf life

12 months from date of production if stored in unopened, undamaged and original sealed packaging.

Storage conditions

Store in dry and cool conditions. Protect from moisture.

Density

~ 0.900 kg/l (at +20 °C)

Volatile organic compound (VOC) content

~319 g/l

(ASTM D 3960)
System information

System structure

1–2 coats of Sikagard®-706 Thixo
Technical Information

Water absorption

< 7.5%

(EN 13580)

Penetration depth

≥ 10 mm

Class II

Note: Test performed on concrete with W/C 0.70

Drying rate coefficient

Class I:

>30%

Resistance to alkalinity

< 10%

(EN 13580)

Freeze thaw de-icing salt resistance

Comply

(EN 13581)

Application

Application Information

Ambient air temperature

+5 °C min. / +40 °C max.

Substrate temperature

+5 °C min. / +35 °C max.

Substrate moisture content

<5-6% when measured with Tramex method

Waiting time to overcoating

Can be overcoated with water and solvent based polymer paint - contact the proposed paint manufacturer for recommendations.
Sikagard®-706 Thixo can be used as water repellent primer under many Sikagard® protective coatings. Penetration of water is thus prevented at possible weak spots or in the event of damage to the top coat and the risk of consequential damages such as paint flaking can be reduced.
Waiting time: minimum 5 hours, maximum 1 week.
Consumption

Consumption

Dependent on substrate profile and porosity as well as the required penetration depth: ~ 200–300 g/m2 per coat.
Normally, 1 coat is enough – preliminary trial shall be carried out to assess the penetration depth in the substrate.
Application steps

MIXING

Sikagard®-706 Thixo is supplied ready for use and should not be thinned or diluted.

APPLICATION

Sikagard®-706 Thixo is applied using airless spray, brush or long-hair roller (including automatically feed roller).

CLEANING OF EQUIPMENT

Clean all tools and application equipment with Colma Cleaner immediately after use. Hardened / cured material can only be mechanically removed.

 

Documents