Sikafloor® Level Pro Primer

▪ EPD according to ISO 14025 and EN 15804
▪ Solvent-free according to TRGS 610

Synthetic resin

12 months from date of production (in closed packaging)

Approximately twelve (12) months from date of manufacture when stored
in its unopened original container. Store in a cool, dry place.
Do not store below +5 °C.

1L = 1kg

▪ Concrete
▪ Sikafloor® Level Pro Primer
▪ Flooring/Tiling products

Between +5 °C to 35 °C

Between +5 °C to 35 °C

▪ Internal Cement Screeds
▪ Internal Calcium Sulphate based Screeds
▪ Internal/External Concrete

All values are approximate and subject to variation due to climatic
conditions. Please refer also to the product datasheets of the
cementitious levelling compounds and tile adhesives.

~ 6 - 8 m2 per L
Average is depending on absorbency of the substrate & applicator device.

Apply neat
Sikafloor® Level Pro Primer by way of a soft bristle broom, or long napped roller 10 – 15mm. Correct amount of primer should always be applied to the

prepared substrate, giving good penetration and film build. Thin applications may result in pinholing in

finished surface or debonding levelling compound

from the substrate. On particularly porous surfaces

where the initial prime coat is absorbed immediately,

or mechanically prepared surfaces a second coat is

recommended. Avoid foam during application by

adding more liquid.

Note: For best practice it is recommended subsequent
construction materials are applied as soon as primer is
dry, but no latter than 24hrs.
▪ Do not allow primer to pool while drying as
this will cause a soft spot under the cement
compound.

▪ Sikafloor® Level Pro Primer is not suitable in
fully submerged applications.
▪ Do not allow dust to settle on the surface.
▪ If dust has contaminated the surface, first
vacuum clean and apply another coat of primer before
subsequent materials are installed.

Clean all tools and application equipment with water
immediately after use.