You have just stepped into the library of Sika's expert know-how. Feel free to search a specific topic or browse general articles at your leisure. Check back often as new articles are published regularly.  

Suggested Searches
Application Field

Application Field

3D Concrete Printing Adhesive Building Envelope Cement Admixture Concrete Concrete Admixture Concrete Repair Construction Adhesive Engineered Repair Expansion Foam Facade Flooring Industrial Coating Industrial Flooring Injection Joint Sealing Mortar Passive Fire Protection Protective Coating Roofing Sealant Shotcrete Wall Coating Waterproofing Waterproofing Membrane Watertight Concrete
Project Type

Project Type

Car Park Commercial Factory Healthcare Industrial
Reset
  • Commercial
  • Waterproofing Membrane
  • Sarnafil®
  • Sustainability
  • Architect
  • Engineer
  • Contractor
  • Article

Sustainable, Resilient Roofing Solutions for Data Centres
  • Cement Admixture
  • SikaGrind®
  • Article

Performance Enhancer for Portland Limestone Cement (PLC)

The motives to replace clinker with supplementary cementitious materials (SCM) are well known. However, granulated blast furnace slag, natural pozzolanes, qualified fly ash and further SCM have a limited availability; the total potential replacement of the global clinker production is less than 30%. Limestone is increasingly being used as a component in Portland-Limestone cements: Sika offers an additive to enhance grinding and performance.
The evaporation of cement additives dosed on hot clinker
  • Cement Admixture
  • SikaGrind®
  • Article

Addressing the Unwanted Impacts of Grinding Aids

Grinding aids and strength enhancers are well known for their ability to increase cement mill productivity, and the mechanical strength of mortar and concrete. However, little information is available on the potential drawbacks of their usage. To close the gap, Sika Services addresses the possible impacts on health and safety and the environment, and on cement properties in production and use.
  • Cement Admixture
  • SikaGrind®
  • Article

Progress with Grinding Aids for Vertical Roller Mills

The effect of grinding aids on the comminution of cement is based on the dispersion of fine particles. It is a misunderstanding that grinding aids for vertical roller mills (VRMs) should stabilise the material bed between the rollers and the table by adhesive forces between the particles. Grinding aids reduce the polarity of the cleaved surface and the attraction forces between particles.
Industrial floor coating with Sikafloor resin cementitious flooring system in food facility
  • Flooring
  • Industrial Flooring
  • Factory
  • Article
  • Architect

Design Tips for Hygienic Floors in Food and Beverage Facilities

A functional and purpose-built floor is key to a safe and hygienic production environment in food and beverage facilities. Floors that are hygienic, non-slip, easy to clean, and durable provide a safe and attractive place to work. Choosing and installing the right floor are critical to every work environment. This article looks at getting it right the first time — achieving satisfactory and long-term flooring in a food processing environment.
Man spraying mortar on the wall
  • Concrete Repair
  • Engineered Repair
  • Mortar
  • Sika MonoTop®
  • Article
  • Applicator

Dry vs Wet Machine Applied Mortars for Concrete Repairs

Concrete repairs can be conducted with different systems and methods. In the European Standard EN 1504 Part 9, Principle 3 defines the application of repair mortars by machine as well as by hand. In this article you will learn about the advantages of machine application for both dry and wet spray processes. We also give an overview of how to select the right method and equipment for each type of application together with the corresponding Sika materials.
Architectural textured concrete wall produced with Sika concrete admixtures at Limmat building in Zurich
  • Concrete
  • Concrete Admixture
  • Architect
  • Article

Architectural Concrete

The ability to appreciate concrete as an aesthetically versatile construction material has led Sika to many innovations in architectural concrete. The flexibility of concrete in design enables the designer to create structures not possible with other construction materials. Combining this flexibility with Sika’s over one hundred years of experience and expertise in concrete formulation and optimization allows structures of true architectural value to be realized.
in color
  • Concrete
  • 3D Concrete Printing
  • Article
  • Architect

3D Concrete Printing

Cementitious 3D construction printing (3DCP) or 3D concrete printing is a form of additive manufacturing used to fabricate buildings or construction components in completely new shapes not previously possible with traditional concrete formwork.
  • Flooring
  • Article

How to Desing a Floor
Industrial floor coating with Sikafloor resin cementitious flooring system in food facility
  • Flooring
  • Industrial Flooring
  • Factory
  • Sikafloor®
  • Article

Slip Resistant Flooring in Food Industry for Employee Safety

Employee safety is one of the most important requirements for any workplace. Slips and falls are among the most common injuries at work. They account for about 86% of total injuries, and 90% of these happen because the floor is wet. These injuries are particularly prevalent in the food industry, where they occur four times more often than the average in other industries. Injuries can create significant impacts to all involved. The most significant is the suffering and possible disabling of the person injured. The next is impact on the company — financial, loss of key staff, loss of productivity, and liability.
Clean red and white decorative laboratory interior floor with female research technician at work
  • Flooring
  • Healthcare
  • Article

Designing colorful floor in hospitals and other healthcare facilities

A well-crafted color palette can do wonders for a healthcare facility. The use of color and graphic images can align to the existing logo and symbolic color of the facility to achieve an overall visual aesthetic, while it can also elicit emotions and unique perceptions of space. It has an ability to calm or excite, can make a room appear smaller or more grandiose, or even trigger subconscious reactions. Color is the most vital, impactful and expressive design element in a designer’s toolbox.
Hygienic floor and wall coating in hospital made with Sika coating systems
  • Flooring
  • Wall Coating
  • Healthcare
  • Article
  • Architect

Hygienic floors, walls and ceilings in hospitals and other healthcare facilities

Infection prevention and control is of utmost importance in hospitals and other healthcare facilities. Building owners, facilities managers, healthcare architects and all others involved in healthcare design decisions need to consider how the materials used within a building contribute to this issue.
Reflection and energy flow on flat roofs with dark and white colors
  • Article
  • Roofing

How is Energy Efficiency of Cool Roofs Measured?

Cool roofs are typically covered with white membrane or reflective coating which reflects sunlight. Their energy efficiency can be measured with three main indicators: solar reflectance, thermal emittance and solar reflectance index.
Car on outdoor parking garage made with Sikafloor coating system
  • Flooring
  • Car Park
  • Article

Wear Resistance of Floor Coatings in Car Parking Garages - Parking Abrasion Test

Everyday parking floors are exposed to mechanical stress. Deck coatings in multi-storey car parks and basement garages are among the most heavily stressed of such systems. Therefore, car park surfaces demand robust and highly resistant coatings. In this article you will learn about our Parking Abrasion Test which we have developed to measure wear resistance of floor coatings in parking garages.
Workers applying wood floor adhesives
  • Flooring
  • Construction Adhesive
  • Adhesive
  • Article

The Science Behind Wood Floor Adhesives

The task of wood floor adhesives is to firmly bond the organic wood floor elements to the generally inorganic screed. The adhesive must hold the wood in place, connect it to the underlying screed and transfer stress originating from the natural expansion and contraction of the wood to the generally rigid screed. The undesired but natural movement of the wood can become visible in cupping, joint formation, or in extreme situations failure of the adhesive or screed.
Loading...