Sika® Injection-111 C
Sika® Injection-111 C is the catalyst designed for use with Sika® Injection 111.
- Environmentally friendly, solvent free
- Easy to pour/mix into Sika® Injection 111
Usage
Sika® Injection-111 C is only to be used only in conjunction with Sika® Injection 111 to adjust the reaction time depending on the desired outcome.Advantages
- Environmentally friendly, solvent free
- Easy to pour/mix into Sika® Injection 111
Packaging
2kg bottle
Colour
clear liquid
Product Details
Composition
Amine-based catalyst
Shelf life
12 months
Storage conditions
From date of production if stored properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5°C and +30°C.
Density
1.00 (g/cm3)
Viscosity
100 mPa.s
Application
Mixing ratio
Sika® Injection-111 requires the catalyst Sika® Injection-111C to create a reactive foam for injection. Typical mix ratios vary from 2-10% of the Sika® Injection-111C depending on the reaction time required, please refer to the reaction table on this PDS for the information.
Reaction time
Reaction time at 5°C
Sika Injection-111C (Catalyst) | Start time | End time |
2% addition | 1min | 5min 38 sec |
6% addition | 30 sec | 3min 25 sec |
10% addition | 23 sec | 2min 33 sec |
Reaction time at 15°C
Sika Injection-111C (Catalyst) | Start time | End time |
2% addition | 51 sec | 5min 6 sec |
6% addition | 23 sec | 2min 54 sec |
10% addition | 18 sec | 2min |
Reaction time at 25°C
Sika Injection-111C (Catalyst) | Start time | End time |
2% addition | 35 sec | 4min |
6% addition | 18 sec | 2min 40 sec |
10% addition | 16 sec | 1min 41 sec |
MIXING
Sika® Injection-111 should be mixed with Sika® Injection-111C using a paddle drill mixer to create a uniform homogeneous liquid for a minimum of 20-30 seconds.
CLEANING OF EQUIPMENT
Please consult equipment/pump manufacturer for relative cleaning agent suitable for your individual equipment being used.