Product Data Sheet Show all documents
Sika® Filler-107

Sika® Filler-107

Ready to use water based general purpose surface filler for use in wet areas

Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas

  • Ready to use, no mixing required
  • Easy application
  • High initial tack or grab on plaster and concrete
  • Quick drying
  • Not sensitive to moisture
Product Data Sheet Show all documents

Usage

  • Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
  • Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
 

Advantages

  • Ready to use, no mixing required
  • Easy application
  • High initial tack or grab on plaster and concrete
  • Quick drying
  • Not sensitive to moisture

Packaging

250ml plastic tube

400 ml plastic tube

Colour

Blue grey paste

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Internal plaster based on organic binder according to EN 15824, DoP 02 03 04 02 001 0 000018 1084, ITT carried out by external laboratory 0402, System 3 certification and provided with CE-mark.
  • Jointing materials for gypsum plasterboards - Type 3A (ready-mix, dual purpose compound), System 4 certification and provided with the CE-mark
Product Information

Composition

Filled styrene-acrylate dispersion

Shelf life

12 months from date of production if stored properly in undamaged and unopened original sealed packaging

Storage conditions

Store in dry conditions. Protect from frost.

Maximum grain size

Dmax: 0.15 mm

Density

~1.100 kg/l

Application

Application Information

Layer thickness

4 mm max.

Ambient air temperature

+5°C min. / +35°C max.

Substrate temperature

+5°C min. / +35°C max.

Waiting time to overcoating

~12 hours
Consumption

Consumption

This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Application steps

MIXING

Sika® Filler-107 is supplied ready to use - no mixing is required.

APPLICATION

Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

Documents