Product Data Sheet Show all documents

Sarna® Cleaner

Cleaner for heavily soiled Sarnafil® G/S

Mixture of high volatile solvents

  • Dissolves contamination of adhesive resin, mastic and bitumen
  • Evaporates quickly
  • Highly flammable
  • Suitable for heavily stained seam overlaps of Sarnafil® G/S membranes
Product Data Sheet Show all documents

Usage

Sarna® Cleaner is used to remove heavy soiling from the seam area of Sarnafil® G/S (PVC) membranes. It is also used to remove adhesive residues from Sarnafil® G/S membranes and to clean tools. Sarna® Cleaner is also suitable for diluting Sarnacol® 2170 adhesive and degreasing metal sheets. Caution: Sarna® Cleaner will remove the lacquer coating from Sarnafil® EL membranes.  

Advantages

  • Dissolves contamination of adhesive resin, mastic and bitumen
  • Evaporates quickly
  • Highly flammable
  • Suitable for heavily stained seam overlaps of Sarnafil® G/S membranes

Packaging

Tin

5 l, 10 l

Packing unit

Europallet or single tin

Colour

Transparent

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Quality management system EN ISO 9001
Product Information

Composition

Mixture of high volatile solvents

Shelf life

24 months from date of production if stored properly in original, unopened and undamaged sealed container. Expiry date on container.

Storage conditions

Store in dry conditions at temperatures between 0 °C and + 30 °C.
The product is highly flammable: Safety regulations regarding storage and handling of dangerous goods must be observed.

Density

~0.9 kg/l (+20 °C)

Consistency

Liquid

 

Volatile organic compound (VOC) content

VOC-CH:  100 %

VOC-EU:  100 %

Application

Application Information

Ambient air temperature

At least -30 °C

Substrate temperature

At least -20 °C
Application steps

APPLICATION

Application Guidline:

Based on the valid installation instructions of the relevant roof waterproofing membrane.

 

Application Method:

 

Cleaner:  Soak a clean white cloth with Sarna® Cleaner and then clean the membrane, tool or metal sheet. The cloths should be changed frequently to avoid the spreading of dirt. When cleaning seams a new cloth is to be used. In the seam areas allow Sarna® Cleaner to evaporate completely before the welding of seams.

 

Adhesive dilutant: See the Product Data Sheet of Sarnacol® 2170 for more information.

CLEANING OF EQUIPMENT

Tools and equipment must be cleaned immediately after use.

Documents