Sikafloor® Level TOP

Green Star (VOC-SCQMD Rule 1168)

Polymer modified cement compound

Unopened bags can be stored for up to 12 months in a cool, dry and
weatherproof environment.

Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior
to application.

1.24kg/m³

3 Grams per litre.

1   day cure >10MPa
28 day cure >25MPa

28 day cure >4.5 MPa

No hazardous combustion products are known.

Porous

5 - 5.2 Litres of clean, cool water

  1 - 30mm (neat)

10 - 50mm (bulked with 1-2mm aggregate)

10°C - 35°C

18 minutes @ 23°C

Allow 18 hours at 23°C prior to the application of impervious floor coverings. Drying is dependent on thickness of application, temperature, air
flow & relative humidity. Increased air flow will help with drying speeds in cooler temperatures.

55-95 minutes at 23°C & 50% relative humidity

60-100 minutes at 23°C & 50% relative humidity

12L - 4m2 @ 3mm

• High speed heavy duty electric drill with stirrer attachment
• Suitable size bucket - 20Lt+
• Purpose built mechanical pump
• Multi-bag mixing station
• Personal protective equipment

• Not mixing for the recommended time or additional water may result in product finish irregularities and possible failure.
• Only mix Sikafloor® Level TOP in full bags and not part bags.

Single Bag Mixing

Mix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix at high speed for 2 minutes to a lump free consistency.

When extending the Sikafloor® Level TOP with aggregate (bulking out purposes) add 10kg of clean 1-2mm aggregate with 20kg of Sikafloor® Level TOP and Thoroughly mix at high speed for 2 minutes to a lump free consistency.

Multi Bag mixing Station

Pre-measure the correct amount of water for the number of bags being mixed. Add the water to the mixing station then slowly add the powder to the water while mixing. Ensure the product is thoroughly mixed for a minimum of 2 minutes from the last bag added to the mixing station.

Pump Machine Application

Ensure pump machines are calibrated to avoid over watering of the mixture.

Pour or Pump Sikafloor® Level Top, then spread with a long handled gauged spreader or trowel to heights as required. Sikafloor® Level Top will seek its own level during the first 12 minutes. For touch-ups, use a flat steel trowel.

For best results use a spike roller as necessary.

Tools and equipment can be cleaned with water product the the material drying.