Product Data Sheet Show all documents

Sika® Filler-105

Ready to use water based thick layer surface filler

Sika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.

  • Ready to use, no mixing required
  • Easy application
  • Thick layer filling and levelling ability
  • High initial tack or grab on plaster and concrete
  • Quick drying
Product Data Sheet Show all documents

Usage

  • Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
  • A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
  • Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
 

Advantages

  • Ready to use, no mixing required
  • Easy application
  • Thick layer filling and levelling ability
  • High initial tack or grab on plaster and concrete
  • Quick drying

Packaging

250 ml plastic tube

400 ml plastic tube
5 Ltr plastic pail

Colour

Light grey paste

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Internal plaster based on organic binder according to EN 15824, DoP 02 03 04 02 001 0 000017 1084; ITT performed by external laboratory 0402; System 3 certification and provided with the CE-mark
Product Information

Composition

Filled styrene-acrylate dispersion

Shelf life

12 months from date of production if stored properly in undamaged and unopened original sealed packaging

Storage conditions

Store in dry conditions. Protect from frost.

Maximum grain size

Dmax: 0.30 mm

Density

~0.900 kg/l

Application

Application Information

Layer thickness

1 mm min. / 15 mm max.

 

Ambient air temperature

+5°C min. / +35°C max.

Substrate temperature

+5°C min. / +35°C max.

Waiting time to overcoating

~ 12 hours (ideally surfaces should be finished with a fine layer filler such as Sika® Filler-101)
Consumption

Consumption

This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-105 can fill ~ 1 m2 per mm thick.
Application steps

MIXING

Sika® Filler-105 is supplied ready to use - no mixing is required.

APPLICATION

Sika® Filler-105 can be applied with a spatula in layer thicknesses from 0 - 30 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

Documents