Product Data Sheet Show all documents

Sika® Eco Systems Eco Prime WB

A SYNTHETIC LATEX BASED PRIMER FOR POROUS SURFACES

Sika® Eco Systems Eco Prime WB is a synthetic, latex based liquid, which is recommended for priming a range of porous substrates prior to the use of SikaFloor Self levelling compounds CTA adhesives and AQUABLOK / Sikatite water based waterproofing membranes.  Sika® Eco Systems Eco Prime WB will reduce porosity of plasterboard, fibrous cement sheeting, cement render and porous susbstrates.

Sika® Eco Systems Eco Prime WB is an easy to use pre-mixed water based primer that will reduce porosity of plasterboard, fibrous cement sheeting, cement render and porous concrete as well as various other porous substrates. • Fast Drying • Premixed • Low VOC • Low odour • Water washable • Easy to use • Suitable primer for Scyon Board
Product Data Sheet Show all documents

Usage

Sika® Eco Systems Eco Prime WB •  Suitable for internal and external use •  Reduces porosity of substrate •  Extends open time of adhesives •  Easy application ready to use. SUITABLE SUBSTRATES •  Porous concrete •  Sand / cement screeds •  Cement render •  Fibrous cement sheeting •  Plasterboard • Hebel (AAC) Flooring • Scyon board

Advantages

Sika® Eco Systems Eco Prime WB is an easy to use pre-mixed water based primer that will reduce porosity of plasterboard, fibrous cement sheeting, cement render and porous concrete as well as various other porous substrates. • Fast Drying • Premixed • Low VOC • Low odour • Water washable • Easy to use • Suitable primer for Scyon Board

Packaging

5 Litre Pails

Colour

White liquid

Product Details

Product Information

Composition

Latex, Co-polymers

Shelf life

12 Months from manufacturing date.

Storage conditions

When ECO SYSTEMS ECO PRIME WB is stored in its original unopened package in a dry area off the ground at a temperature of 23°C and a relative humidity of 60%, it should be usable for approximately 12 months. Must be kept away from direct sunlight and excessive heat.

Application

Application Information

Substrates

• Porous concrete

• Sand / cement screeds

• Cement render

• Fibrous cement sheeting

• Plasterboard 

• Hebel (AAC)

• Scyon Boards

Waiting Time / Overcoating

DRYING Allow a minimum of 15 minutes at 23 C before the application of finishes.

Once primer is dry to touch, Tiling may commence.

Drying times may vary depending on application and is dependent on substrate porosity, ambient temperature and relative humidity.

Documents