
Sikafloor® Rapid Patch
Sikafloor® Rapid Patch is a low slump patching & grading mortar used on internal & external concrete.
- Very Low VOC (1 grams per litre)
- Rapid drying
- Internal & external applications
- Non-combustible
- Fast setting
- Smooth flat surface is achievable
- High early strength 24hrs = 30MPa
- Walkable in as little as 30-40 minutes
- Installation of flooring in 60-90 minutes
Usage
- Applied by its self, or part of a system with suitable materials from Sikafloor®, Sikadur® SikaBond®,
- Ramping/grading to create a smooth transition between two types of flooring
- Patching damaged concrete floors, stairs, & walls
Advantages
- Very Low VOC (1 grams per litre)
- Rapid drying
- Internal & external applications
- Non-combustible
- Fast setting
- Smooth flat surface is achievable
- High early strength 24hrs = 30MPa
- Walkable in as little as 30-40 minutes
- Installation of flooring in 60-90 minutes
Packaging
20kg Bag - 48 bags per pallet
Colour
Grey powder
Product Details
APPROVALS / CERTIFICATES
Green Star (VOC-SCQMD Rule 1168)
Composition
Polymer modified cement mortar
Shelf life
Unopened bags can be stored for up to 9 months in a cool, dry and
weatherproof environment.
Storage conditions
Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.
System structure
Porous Concrete | Very Porous Concrete | Non-porous Surface |
Sikafloor® Rapid Patch | Diluted Sikafloor® 01 Primer or Water | Sikafloor®-14 Prep N Prime |
Subsequent suitable materials | Sikafloor® Rapid Patch | Sikafloor® Rapid Patch |
Subsequent suitable materials | Subsequent suitable materials |
Compressive strength
1 day cure – 30MPa
28 day cure – 50MPa
Reaction to fire
No hazardous combustion products are known
Water absorption
Porous
Application
Mixing ratio
4 - 4.2 Litres of clean, cool water
Layer thickness
1 - 50mm
Ambient air temperature
10°C - 35°C
Pot Life
10 minutes @ 23°C
Initial set time
15 minutes @ 23°C
Final set time
17 minutes @ 23°C
Waiting time to overcoating
Allow 60 – 90 minutes at 23°C prior to subsequent applications
Yield
12L - 12mm @ 1m2
EQUIPMENT
High speed heavy duty electric drill and mixing paddle.
Suitable size bucket/vessel - 20L +
MIXING
Mix the entire 20kg bag of powder with 4 - 4.2 Litres of clean, cool water. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix for only 1 minutes to a lump free consistency and apply directly.
Not mixing for the recommended time or additional water may result in product irregularities and possible product failure.
APPLICATION
Using Sikafloor® Rapid Patch prior to floor coverings:
Grading/Ramping
Once product is mixed immediately apply and begin working to heights required.
Product can be worked/shaped/shaved with the back of a trowel up to 20 minutes after application.
Using Sikafloor® Rapid Patch to repair concrete:
Patching concrete
On a well prepared clean and roughened concrete
surface a bonding primer is generally not
required, but pre-dampening of the surface with
water is recommended. After water has been
applied and allowed to soak the concrete surface
should achieve a dark matt appearance without
glistening and surface pores and pits shall not
contain water. The surface shall not be allowed
to completely dry before application of Sikafloor®
Rapid Patch.
If priming is preferred first diluted Sikafloor® 01
Primer 1:3 with water then apply by way of a brush till
all areas have been coated and allow to dry.
Once placed, a trowel is used to pack & shape
Sikafloor® Rapid Patch into the concrete void.
Sikafloor® Rapid Patch can also be left high of the
finished surface required and shaved using the trowel
until full set. Working time 15 - 20 min @ 23°C.
Note: Freshly applied Sikafloor® Rapid Patch must be
protected from damp, condensation and all forms of
water while curing for at least 24 hours.