Sika® Firerate

• AS 1530.4 FRL
• ISO 717.1 Rw (Ctr) = 64 (-13)

1- part acrylic dispersion

Sika® Firerate has a shelf life of 12 months from the date of production, if it is stored in undamaged, original, sealed packaging, and if the storage conditions are met.

Sika® Firerate shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C

~1.45 kg/L

After 28 days ~30

±20 %

−20 °C to +80 °C

The joint width must be designed to suit the joint movement required and
the movement capability of the sealant. The joint width shall be ≥ 10 mm
and ≤ 50 mm. The joint depth shall be ≤ 10 mm. A width to depth ratio of
2:1 must be maintained.
All joints must be correctly designed and dimensioned in accordance with
the relevant standards, before their construction. The basis for calculation
of the necessary joint widths are the type of structure and its dimensions,
the technical values of the adjacent building materials and the joint sealing
material, as well as the specific exposure of the building and the joints.
Note: Test certificates should be referred to while designing a firerated joint

5 °C to +40 °C, min. 3 °C above dew point temperature

+5 °C to +35 °C

Use polyethylene foam backing rods

at +23 °C / 50 % r.h. ~2 mm/24 h

at +23 °C / 50 % r.h. ~15 min

The substrate must be clean, dry, sound and homo- geneous, free from oils, grease, dust and loose or friable particles. Sika® Firerate adheres without primers and/or activators.

Clean all tools and application equipment immediately after use with water. Once cured, residual material can only be re- moved mechanically.